Cold Formed Section Steel - Heavy Duty Concrete Insert (P3200,P3300,P 3754,P 3270,P 3370 ) – Rainbow
Cold Formed Section Steel - Heavy Duty Concrete Insert (P3200,P3300,P 3754,P 3270,P 3370 ) – Rainbow Detail:
Concrete Insert Strut Channels installed in reinforced concrete provide a continuous slot for the precise location of cable, conduit, pipe, hanger rods or frames.
Install Concrete Insert Strut Channel across the anticipated area of use to save time and money by eliminating the need to drill and install anchors. Use in walls, floors and ceilings. All inserts are shipped complete with two Anchor Caps and Ethafoam filler. Ethafoam filler resists the entrance of wet concrete and is easily removed in one piece eliminating the significant clean-up required with old Styrofoam fillers.
Our company is a niche market supplier of high quality products that include: electrical and telecom strut,inserts,cable rack,anchor boltsetc. We are a design/build supplier which can provide a wild range of construction related products.
Product Description:
Item No.: P3200,P3300,P 3754,P 3270,P 3370
Product Name: Hot Dipped Galvanized Insert w/ 6″ Studs & Nuts
Included Parts:
5953 (Anchor End Cap)
6518 (Closure Strip)
1/2-M E/G G (1/2″ Nut w/o Spring)
9320 (Foam Pedestal)
Concrete Insert is ideal for anchoring structures and supports to concrete. This product allows easy installation before the concrete is poured, and attachment anywhere along its length using 1-5/8″ Fittings,Channel Nuts or other products. It is perfect for applications that may need to be re-configured or re-anchored.
This product may be used for anchorage on ceilings, floors or walls. Being a pre-pour installation, it is ideal for applications with cracked concrete concerns and avoids the creation of Silica Dust during installation. It is also OPA approved for seismic bracing applications.
Channel dimensions are 1 5/8″ wide x 1 3/8″ deep x 12 ga. thick. Embedment tabs are spaced at 8″ O.C. and have an embedment depth of 2-7/8″. The product may be supplied with Back Plates, End Caps and a Closure Strip to prevent concrete seepage into the channel, per the options below.
Our Concrete Insert is available in Pre-Galvanized (PG), Hot-Dip Galvanized (HG), and Plain (PL).
Options:
“CS/EC” Suffix – With Closure Strip, End Caps & Back Plates
“W/O” Suffix – No Closure Strip, no End Caps, with Back Plates
Part No. Length (ft) Finish Product Weight / Piece (lbs)
20′ CS/EC 20′ PG 38.8
20′ CS/EC 20′ HG 40.9
20′ CS/EC 20′ PL 38.6
20′ W/O 20′ PG 38.6
20′ W/O 20′ HG 38.6
20′ W/O 20′ PL 38.6
Product detail pictures:
Related Product Guide:
Technical Specification for safety of steel pipe scaffold for construction
Some problems in the construction of steel structure and their solutions
"Sincerity, Innovation, Rigorousness, and Efficiency" would be the persistent conception of our enterprise with the long-term to build with each other with consumers for mutual reciprocity and mutual advantage for Cold Formed Section Steel - Heavy Duty Concrete Insert (P3200,P3300,P 3754,P 3270,P 3370 ) – Rainbow , The product will supply to all over the world, such as: Hungary, Poland, South Korea, Certainly, competitive price, suitable package and timely delivery will be assured as per customers' demands. We sincerely hope to build business relationship with you on the basis of mutual benefit and profit in the very near future. Warmly welcome to contact us and become our direct cooperators.
By Carol from Latvia - 2017.02.18 15:54
Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
By Michelle from Indonesia - 2018.06.30 17:29
