Product Description:

Angle Bars protect any corner or surface that needs to keep its shape. It is welded at the structure or attached through drilled fastening. Usually used on a building’s exterior to strengthen the edges. Angle bars reduce erosion and weathering which create significant damages in a structure over time. Heavier loads are better supported by using angle bars.

Angle Bars is a steel bar shaped like an L. One angle is perpendicular to the other. This forms an inside angle as well as an outside angle. it is used to create supported corners and outside rims. These corners and rims are used for various walls and surfaces. Such bars are easily applied to virtually any type of surface through welding or by using drilled fastening methods.Steel Angel are used to offer a strengthened support to structures that otherwise would not be able to endure the pressure placed on them. They are also used to reinforce edges on surfaces to prevent damage or erosion due to weathering. In the simplest sense, angle bars are used to protect any edges and corners that are required to hold their shap.

1. Low treatment cost: The cost of hot dip galvanizing is lower than that of other paint coatings.

2. Durable: Hot-dip galvanized steel angle iron has the characteristics of surface luster, uniform zinc layer, no leakage, no drip-slip, strong adhesion and strong corrosion resistance. In suburban environment, the standard thickness of hot-dip galvanized rust-proof can be maintained for more than 50 years without repair; in urban or offshore areas, the standard thickness of hot-dip galvanized rust-proof layer can be maintained for 20 years. It doesn’t need to be repaired.

3. Good reliability: The galvanized layer is metallurgical bond with the steel and becomes a part of the steel surface, so the durability of the coating is more reliable.

4. The coating has strong toughness: the galvanized layer forms a special metallurgical structure, which can withstand mechanical damage during transportation and use.

5. Comprehensive protection: Every part of the plated part can be galvanized, even in the depression, sharp corner and hidden place can be fully protected;

6. Time-saving and labor-saving: galvanizing process is faster than other coating construction methods, and can avoid the time required for painting on the site after installation.

Product Specification:

Inspection:

We will use the most precise instrument to test the inner diameter and outer diameter of the hole, measure the wall thickness and the thickness of the zinc layer, and the standard rate is 100%

Product Applications:

Angle steel is mainly used to make frame structures, such as pylons for high-voltage power transmission, frames on both sides of main beams of steel structure Bridges, columns and arms of tower cranes on construction sites, columns and beams of workshops, etc., small places such as flower pot shaped shelves on the roadside during festivals, shelves hanging air conditioning solar energy under Windows, etc.