Steel Angle

  • Hot Dip Galvanized Slotted Steel Angle Bar

    Hot Dip Galvanized Slotted Steel Angle Bar

    Hot Diped Galvanized steel angle. Tianjin Rainbow Steel is specialized in the manufacturing steel products. If you have any inquiry, please feel free to contact me .

  • Fabricated Galvanized Steel Angle Bar for Australian

    Fabricated Galvanized Steel Angle Bar for Australian

    Angle steel can be composed of different forces according to the different needs of the structure, and can also be used as the connection between the components. It is widely used in various building structures and engineering structures, such as beam,bridge, transmission tower, lifting machinery, ships, industrial furnaces, reaction towers, container racks, cable trench supports, power piping, bus support installation, and warehouse shelves.

  • Angle Bar (Lintel) Cross Arm 75*75*8*1700mm

    Angle Bar (Lintel) Cross Arm 75*75*8*1700mm

    Angle steel is widely used in various metal structures, bridges, machinery manufacturing and shipbuilding, various building structures and engineering structures, such as building beams, bridges, power transmission towers, lifting and transporting machinery, ships, industrial furnaces, reaction towers, container racks, and Warehouse etc.

  • Galvanized Slotted Angle Iron

    Galvanized Slotted Angle Iron

     are the most basic type of roll-formed steel. They are formed by bending a single angle in a piece of steel. Angle Steel is ‘L’ shaped; the most common type of Steel Angles are at a 90 degree angle. The legs of the “L” can be equal or unequal in length. 

  • Steel Building Materials Hot Dip Galvanized Steel Ribbed Lintels

    Steel Building Materials Hot Dip Galvanized Steel Ribbed Lintels

    s protect any corner or surface that needs to keep its shape. It is welded at the structure or attached through drilled fastening. Usually used on a building’s exterior to strengthen the edges. Angle bars reduce erosion and weathering which create significant damages in a structure over time. Heavier loads are better supported by using angle bars.

  • Slotted Metal Angle Bar Angle Bar Metal

    Slotted Metal Angle Bar Angle Bar Metal

     is a kind of carbon structural steel for construction. It is a simple section steel. It is mainly used for metal components and the frame of factory buildings. In use, it is required to have better weldability, plastic deformation performance and certain mechanical strength. The raw steel billet for the production of Angle steel is low-carbon square steel billet, and the finished Angle steel is delivered in hot rolled, normalized or hot rolled state.

  • Steel Angle Bar Punching 150*150*10mm

    Steel Angle Bar Punching 150*150*10mm

    Hot-dip galvanized  has the characteristics of surface luster, uniform zinc layer, no leakage, no drip-slip, strong adhesion and strong corrosion resistance. In suburban environment, the standard thickness of hot-dip galvanized rust-proof can be maintained for more than 50 years without repair; in urban or offshore areas, the standard thickness of hot-dip galvanized rust-proof layer can be maintained for 20 years. It doesn’t need to be repaired.

  • Steel Angle

    Steel Angle

     is a carbon structural steel for construction. It is a section steel with a simple section. It is mainly used for metal components and the frame of factory buildings. In use, it requires good weldability, plastic deformation performance and certain mechanical strength. The raw material billets for the production of angle steel are low-carbon square billets, and the finished angle steel is delivered in a hot-rolled, normalized or hot-rolled state.