Concrete Inserts are the ideal solution for easily installed anchors to concrete foundations. Made from cold-rolled steel and available in Pre-Galvanized (PG), Hot-Dip Galvanized (HD), and Stainless Steel finishes (type 316 [ST6] or 304 [ST4]), our inserts are designed for high performance and reliability in every application throughout the construction and civil engineering industries.

Our inserts are easily installed without the dust, noise, or sparks of other anchoring methods. Easily removable plastic strips or Ethafoam filling prevent concrete from entering the channel during the pour, and twist-in strut nuts allow for adjustable anchoring positions along the channel.

STANDARD CONCRETE INSERTS

P3200 Series Concrete Insert is ideal for anchoring structures and supports to concrete. This product allows easy installation before the concrete is poured, and attachment anywhere along its length using 1-5/8″ Fittings, Channel Nuts or other products. It is perfect for applications that may need to be re-configured or re-anchored.

This product may be used for anchorage on ceilings, floors or walls. Being a pre-pour installation, it is ideal for applications with cracked concrete concerns and avoids the creation of Silica Dust during installation。

Channel dimensions are 1 5/8″ wide x 1 3/8″ deep x 12 ga. thick. Embedment tabs are spaced at 8″ O.C. and have an embedment depth of 2-7/8″. The product may be supplied with Back Plates, End Caps and a Closure Strip to prevent concrete seepage into the channel, per the options below.

Our P3200 Series is available in Pre-Galvanized (PG), Hot-Dip Galvanized (HG) and Plain (PL)

Specifications:

• Includes closure and end caps unless otherwise requested.
• P3280 end cap used with distance to first anchor is up to 2″ (51 mm).
• P3704 end cap is used when end distance to first anchor is over 2″ (51 mm).
• Nail or anchor inserts to forms every 16″ (406.4 mm) to 24″ (609.6 mm).
• Anchors are 8″ (203.3 mm) on center.

Design Loads:

• Design loads, where shown, are based on 3,000 PSI concrete, unless noted.
• Safety factor = 3.0.

Options:

• “NC” Suffix – No Closure Strip, with End Caps & Back Plates
• “WC” Suffix – With Closure Strip, End Caps & Back Plates
• “X” Suffix – No Closure Strip, no End Caps, with Back Plates